Fog Light Wiring Adapters H16 to Deutsch Set

Purchase

Price: $24.99
Product ID : 5016
IN STOCK

More images

Click to enlarge

Description

Looking for a way to connect Rigid Industries lamps to factory fog light wiring without cutting or splicing? Now available is a plug-n-play solution from Starkey. This wiring adapter will convert from an H16, 5202, 2504, 9009 or PSX24W bulb connector to the Deutsch 2-pin connector used on Rigid Industries LED Lights as well as other lights utilizing Deutsch connections.  

Features and Benefits:

  • Only OEM quality connectors & wire are used – don’t settle for anything less!
  • No cutting or splicing required – just plug the new adapters in and you’re done.
  • Converts from an H16, 5202, 2504, 9009 or PSX24W bulb connector to Deutsch DT Series 2-pin connector.
  • Assembled in USA!
  • Works with all aftermarket LED cube lights that utilize Deutsch connections.*

Fitment:

  • 2010-2019 Jeep Wrangler
  • 2011-2013 Jeep Grand Cherokee
  • 2014-2019 Jeep Cherokee
  • 2007-2017 Chevrolet 1500 Trucks (new body style 2007’s only, trucks with factory LED fog lights see SKU #5017)
  • 2007-2019 Chevrolet 2500, 3500 Trucks (new body style 2007’s only)
  • 2007-2014 Chevrolet Tahoe, Suburban and Avalanche
  • 2015-2019 Chevrolet Colorado
  • 2010-2011 Dodge Dakota
  • Other models that utilize an H16, 5202, 2504, 9009 or PSX24W fog light bulb connector

What’s Included:

  • One set of 6-inch adapters with weatherproof connectors
  • Zip-ties to secure all wiring
  • 5 Year Limited Warranty

Installation:

  • Installation difficulty = Very Low
  • Installation time = 5 minutes
  • Tools required = None

*Depending on brand of LED cube lights used, the polarity of the wiring adapters may need to be reversed. No special tools are required. Instructions on reversing the polarity of the adapters are included with product.

Questions

No results found. Revise your search or submit your question
Results. Not what you are looking for? Next
Review your question to make any final changes. It may be sent to fellow customers so ask as if you were asking a friend.

Cancel | Submit your question
Your question has been submitted and it will be appear shortly after reviewing it.

Product Reviews

Reviewed by Jayson
on Aug 2, 2019
No splicing wires, plug and play
Good product and good description. Fast shippong, would use again.
Reviewed by Brandon
on Feb 25, 2019
Works great
You have to make sure the Deutsch side has correct polarity if it does not work don't get discouraged and give up just yet all you need is a small flat head screwdriver to take the end cap off and switch the metal barbs on the inside super easy. Works like a charm! Great product.
Reviewed by Africa
on Nov 6, 2018
It was a snap!
This product worked great. Snapped one side into factory fog light harness and the other into my rigid industries SAE fog light and turned right on. Hopefully it lasts me for a while! Being in such a wet area.
Reviewed by William R
on Oct 26, 2018
Great product so far...
Great product so far, so much better than cutting into factory wiring.
Reviewed by brandon kowalski
on Oct 22, 2018
Perfect fit and finish
works great plug and play. I had no problems using these on my Jeep rubicon.
Copyright 2019 Starkey Products, Inc.. All Rights Reserved. Site Map | Terms + Conditions

Starkey Products, Inc. is an unauthorized independent alternative source aftermarket replacement/restoration crash parts manufacturer. The marks shown on the website are the property of their respective companies.
Starkey Products disavows any affiliation, sponsorship, endorsement or approval by any company.

E-Commerce Development by Ryan Design Studio