Fog Light Wiring Adapters H16 to Deutsch Set

Fog Light Wiring Adapters H16 to Deutsch Set

$29.99

Shipping calculated at checkout

5.0 / 5.0 based on 5 reviews

SKU: 5016

Available Now!

Looking for a way to connect Rigid Industries lamps to factory fog light wiring without cutting or splicing? Now available is a plug-n-play solution from Starkey. This wiring adapter will convert from an H16, 5202, 2504, 9009 or PSX24W bulb connector to the Deutsch 2-pin connector used on Rigid Industries LED Lights as well as other lights utilizing Deutsch connections.  

Features and Benefits:

  • Only OEM quality connectors & wire are used – don’t settle for anything less!
  • No cutting or splicing required – just plug the new adapters in and you’re done.
  • Converts from an H16, 5202, 2504, 9009 or PSX24W bulb connector to Deutsch DT Series 2-pin connector.
  • Assembled in USA!
  • Works with all aftermarket LED cube lights that utilize Deutsch connections.*

*Depending on brand of LED cube lights used, the polarity of the wiring adapters may need to be reversed. No special tools are required. Instructions on reversing the polarity of the adapters are included with product.

      • 2010-2019 Jeep Wrangler
      • 2011-2013 Jeep Grand Cherokee
      • 2014-2019 Jeep Cherokee
      • 2007-2017 Chevrolet 1500 Trucks (new body style 2007’s only, trucks with factory LED fog lights see SKU #5017)
      • 2007-2019 Chevrolet 2500, 3500 Trucks (new body style 2007’s only)
      • 2007-2014 Chevrolet Tahoe, Suburban and Avalanche
      • 2015-2019 Chevrolet Colorado/ GMC Canyon
      • 2010-2011 Dodge Dakota
      • Other models that utilize an H16, 5202, 2504, 9009 or PSX24W fog light bulb connector

        What’s Included:

        • One set of 6-inch adapters with weatherproof connectors
        • Zip-ties to secure all wiring
        • 5 Year Limited Warranty

            Installation:

            • Installation difficulty = Very Low
            • Installation time = 5 minutes
            • Tools required = None

                 

                Customer Reviews

                Based on 5 reviews
                100%
                (5)
                0%
                (0)
                0%
                (0)
                0%
                (0)
                0%
                (0)
                J
                Jayson
                No splicing wires, plug and play

                Good product and good description. Fast shippong, would use again.

                B
                Brandon
                Works great

                You have to make sure the Deutsch side has correct polarity if it does not work don't get discouraged and give up just yet all you need is a small flat head screwdriver to take the end cap off and switch the metal barbs on the inside super easy. Works like a charm! Great product.

                A
                Africa
                It was a snap!

                This product worked great. Snapped one side into factory fog light harness and the other into my rigid industries SAE fog light and turned right on. Hopefully it lasts me for a while! Being in such a wet area.

                W
                William R
                Great product so far...

                Great product so far, so much better than cutting into factory wiring.

                b
                brandon kowalski
                Perfect fit and finish

                works great plug and play. I had no problems using these on my Jeep rubicon.